F3可编程控制系统
F3 - Programmable Automation Controller with Intel®-Atom™ CPU
In spite of the compact enclosure the F3 base unit offers all interfaces known from the PC technology like Ethernet and USB. Operator panels are connected over DVI/VGA or via the Automata Panel Interface, a solution to transmit video, touchscreen, USB and power over a single cable.
The integrated IO bus allows the local or remote connection of F3 IO modules. For high sophisticated applications a sercos III master interface is available. 512 KB NVRAM and a CAN interface complement the list of important features for the application of the F3 as a automation controller.
The
F3
base unit is programmed with CoDeSys in IEC-61131, as operating system Windows® CE is used. Other operating systems are available on demand.
General Data | |
---|---|
Housing dimensions (width x height x depth) | 66.0 mm x 99.0 mm x 114.5 mm |
Weight | 440 g (without compact flash), 450 g (withcon compact flash) |
Permissible operating temperature | +5° to +55°C |
Permissible storage and transport temperature | -25° to +85°C |
Permissible humidity | 10% to 95%, not condensing |
Permissible air pressure (Operation) | 80 to 106 kPa (up to 2000 above sea level) |
ermissible air pressure (Storage and transport) | 70 to 106 kPa (up to 3000 above sea level) |
Degree of protection | IP20 in accordo a IEC 60529 |
Connection method for power connector | Spring cage terminals |
Conductor cross-section for power connector | 0.2 to 2.5 mm 2 (24 – 12 AWG) |
Recommended cable for COM connection | Ethernet FTP Cat. 5E |
Recommended cable for SDVL connection | Dual link DVI with ferrite chokes |
Functional earth connection | To the Din rail with spring contact |
Mode state visual state indicators | Stato (STS) e Power (PWR, BP1,BP2) LED lamps on front panel |
Power supply | |
---|---|
Main power supply V M | 24 V DC (-15% ÷ + 20% according to IEC 61131-2) |
Maximum allowed ripple | 5% of supply voltage (according to IEC 61131-2) |
Current consumption from main supply | 0.3 A max. |
Supply overvoltage protection on V M | Unidirectional Zener clamp (V z > 30 V) |
Supply reverse polarity protection | Input shunt diode, reverse connected |
Supply fuse | 5 A, not replaceable by user |
Power presence visula indicators | Green LED lamp, lighted if main supply is present (PWR) |
Internal power #1 | 5 V DC / 3 A, regulated |
Internal power #1 protections | Overcurrent, catastrophic overvoltage |
Internal power #1 visual indicators | Green LED lamp, lighted is supply is present (PW1) |
Internal power #2 | 24 V DC / 2 A, not regulated |
Internatl power #2 protections | Overcurrent |
Internal power #2 visual indicators | Green LED lamp, lighted if supply is present (PW2) |
Processor Unit | |
---|---|
Microprocessor | Intel ® Atom ™ Z5xx 1.1 o 1.6 GHz |
Chipset | Intel ® SCH US15W |
Grafic | Chipset integrated Graphic Media Accelerator 500, 18-24 bpp |
System Memory | Upt to 1GB DDR2 533MHz |
Mass Memory | Compact Flash socket, 1 Master channel, interfaccia IDE Tipo II |
Com port | RS232, 422, 485 optoisolated,selectable through switch, RJ-45 connector |
Ethernet | 10/100/1000 via connettore RJ-45 |
USB | 1 Port through type A, 2 ports thorough DVI connector |
Video Output | Automata Digital Video interface through DVI connector |
Internal Bus | 1 PCIe connector for expansion boards |
LED for visual indicator status | 3 LEDs (Red, Yellow, Green) software configurable |
Reset | front panel reset button |
Local Bus | F3 IOs bus proprietary |
Interface | |
---|---|
Module address setting | With rotary switch on front panel |
Connection bus | By TBUS connector on DIN rail |
Level of ESD protection | 8 kV (IEC 61000-4-2, contatto discharge |
- asdasd
- asdasd