I/O MODULE 2 analog inputs and 10V reference
61KZ010244 AI2 VP
- 2 路模拟量输入, O-10 V
- 2 路电压参考 10 V
- 12 位分辨率
- 状态和诊断 LED 显示
General data | |
---|---|
Housing dimensions (width x height x depth) | 22.5 mm x 99.0 mm x 114.5 mm |
Weight | 97 g (without connectors), 116 g (with connectors)) |
Permissible operating temperature | +5° to +55°C |
Permissible storage and transport temperature | -25° to +85°C |
Permissible humidity | 10% to 95%, not condensing |
Permissible air pressure (operation) | 80 to 106 kPa (up to 2000 m above sea level) |
Permissible air pressure (storage and transport) | 70 to 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP20 according to IEC 60529 |
Connection method for connectors | Spring cage terminals |
Conductor cross-section (power connector) | 0.2 to 2.5 mm2 (24 – 12 AWG) |
Conductor cross-section (I/O connector) | 0.08 to 1.0 mm2 (28 – 18 AWG) |
Functional earth connection | To the DIN rail with spring contact |
Mode state visual indicators | Fault (FLT), status (STS) LED lamps |
Power supply | |
---|---|
Main power supply VM | 24 V DC (-15% ÷ + 20% iaccording to IEC 61131-2) |
Maximum allowed ripple | 5% of supply voltage (according to IEC 61131-2) |
Current consumption from main supply | 1.5 A max. (for external loads supply) |
Supply overvoltage protection | Bidirectional Zener clamp (Vz > 30 V) |
Supply reverse polarity protection | Protection diode, and safety fuse |
Power Fuse | 2 A, not replaceable by the user |
Local bus power supply | 5 V DC (from local bus) |
Local bus supply protections | None |
Power presence visual indicators | Green LED lamp, lighted if main supply is present (PWR) |
Max. current on VS pin | 1.5 A max. |
Analog inputs | |
---|---|
Number of inputs | 2, software configurable |
Voltage inputs measuring range | 0-10 V |
Voltage inputs typical impedance | 28.2 kΩ |
Voltage inputs digital resolution | 12 bit |
Voltage inputs measuring error | t.b.d. |
Voltage inputs temperature coefficient | t.b.d. |
Current inputs measuring range | 0-20 mA |
Current inputs digital resolution | 12 bit |
Current inputs measuring error | t.b.d. |
Current inputs temperature coefficient | t.b.d. |
Inputs common potential isolation from GND | 500 VAC, functional |
Isolation between channels | None |
Input state visual indicators | None |
Reference output | |
---|---|
Nominal reference voltage | 10 V |
Output tolerance | t.b.d. |
Output temperature drift | t.b.d. |
Output current | 20 mA max. |
Interface | |
---|---|
Local bus | Proprietary F3 IOs BUS |
Moduli address setting | with rotary switch on front panel |
Bus connections | by TBUS connectors on DIN rail |
Interface circuitry protections | ESD protections |
Level of ESD protection | ±8 kV (IEC 61000-4-2, contact discharge) |